Dexide-200

Dexide-200

Ingredients

• Quaternary ammonium compounds – 12.5%

• Glutaraldehyde – 5%

• Isopropanol – 13%

• Pine oil – 0.3%

Description
Dexid-200 is a disinfectant based on an optimized mixture of glutaraldehyde and quaternary ammonium compounds (QAB) in aqueous solution. This product combines the powerful, broad-spectrum action of glutaraldehyde with the soil-penetrating, cleaning and rapid microbicidal properties of QABs. Dexid-200 is effective against microorganisms such as bacteria, viruses and fungi and is effectively used to protect animal health and hygiene. It is intended as a final disinfectant for thoroughly cleaned and washed surfaces.

Instructions for use

Livestock buildings and incubators:

• Clean the surfaces with a suitable detergent.

• After washing and drying, apply Dexid-200 solution at a ratio of 0.5% (without disease: 1:200) or 1% (with disease spread: 1:100) by spraying on the surfaces (approximately 1 liter of solution per 4 m²).

• For fogging: 2 L Dexid-200 + 3 L water per 1000 m³.

• After a minimum of 20 minutes of contact, rinse the area thoroughly and allow it to dry completely before returning the animals.

Trucks and trailers:

• Clean with a suitable detergent.

• After washing and rinsing, spray Dexid-200 solution at a ratio of 1% (1:100).

• Wash off after 20 minutes.

• Also use 1% (1:100) solution for wheel baths.

Areas where feed and food products are stored and processed:

• Clean the surfaces with a suitable detergent.

• After washing and rinsing, apply 0.5 – 1% (1:200 – 1:100) Dexid-200.

• Wash after contact for at least 20 minutes.

Vehicles for food transportation:

• Clean the cars with a suitable detergent.

• After washing and rinsing, apply 0.5 – 1% (1:200 – 1:100) Dexid-200.

• Wash off after at least 20 minutes.

Shoe disinfection baths:

• Dilute Dexid-200 in a ratio of 1% (1:100) and refresh the bath regularly (every 2–3 days, or daily for better results).

Note: Dexid-200 is biodegradable and works effectively in both soft and hard water. The solution can be used by soaking, spraying and fogging methods.